Apart from blocking the view and controlling light, curtains can do wonders when placed at appropriate places. Curtains in Dubai, when positioned properly, can transform the room dimensions entirely, making the windows bigger, the ceiling taller, and the whole area looking very neat.
The most popular mistake people do in hanging the curtains is positioning the curtain rod right above the window frame. Though this seems quite an obvious way to position the curtains, this can make your window and ceiling appear smaller.
Here, in this blog, you will be shown the precise measurements to hang your curtains; from height, width, and length. All these are in inches and centimeters. And some of the factors we discuss here are usually not covered in other guides, such as sunlight in Dubai, glass-to-the-floor windows, and drilling in concrete.
Why Curtain Height Matters So Much
In selecting curtains UAE, most people usually put into consideration the type of fabric, the color, and the designs used. But they mostly do not pay to the height of the curtains which is equally important. The right height of the curtains can completely change the look of the room. With curtain installation in Dubai, you can make it look bigger, balanced, and cozy. Too short curtains will seem out of place; meanwhile, long curtains can end up accumulating dust or even creating chaos.
Step-by-Step: How to Measure Curtain Height
Step 1: Decide Where the Rod Goes
In the first place, pick the location for hanging the curtain that you would like. You could fix the rod higher up on the wall. Making the room seem taller, or fix it right above the window.
Step 2: Check it is Level
Use a spirit level or a laser. Do this on both sides, especially if your ceiling and walls are uneven. The slightest variation in the height of the two points will cause your curtains to be hung crookedly.
Step 3: Measure the Drop
Start by measuring the distance from the bottom of the rod or track vertically down. Doing this, you figure out where you want the curtains to end. The window curtains Dubai can end just above the floor, reach the floor, or even go past it. Additionally, you need to take into account curtain rings or gliders when hanging your curtains.
Step 4: Measure at Three Points
Measure the drop of the curtain at the left side, center, and the right. Since floors and ceilings may not always be exactly level, there will be some differences in these measurements. To have the curtains floating above the floor, use the smallest suitable measurement.
Step 5: Measure the Width
Take the window width, add the extension on each side. The whole width of the window should be measured, along with the additional space needed on either side for mounting the rod or the track. This additional space will allow the curtains to cover the window when pulled and fold away from the glass panes when opened. The track width should finally be multiplied by the desired fullness factor.
Step 6: Write it All Down
Write down the curtain drop, the width of the track, and all other necessary measurements. Make sure to label each window you are measuring. Since windows may be different throughout the entire house. Recheck all figures before placing an order. Then double-check; this way you can prevent having to make adjustments later on.
Common Mistakes to Avoid
- Hanging Curtains at the Window Frame
Common error is placing the curtain rod above the window trim rather than higher up in order to achieve an elegant look and give the ceiling and windows a more spacious appearance. Placing the curtain rods lower down may lead to the ceiling seeming shorter than it is. This makes the space appear smaller overall. It is important to measure the height of the ceilings and the windows before installation.
- Choosing a Curtain Rod That is Too Narrow
If the curtain rod is just slightly larger than the window, it could make it impossible for the curtain to be fully opened, thus obstructing some of the window glass. This makes it look like the window is small while at the same time blocking out some light. The best way would be to select a curtain rod or track that projects beyond the window by a few inches to facilitate complete opening of the curtains.
- Selecting Curtain Panels with Insufficient Fullness
If the curtain is not wide enough for the window, it will appear flimsy, pulled, and ill-fitted despite the quality of the fabric used. There should be sufficient fullness for an aesthetically pleasing pleat and a richer appearance. In calculating the fabric required, one should consider the width of the rod or pole and the amount of fullness that is suggested depending on the style of heading one would want.
- Getting the Curtain Length Wrong
If curtains are too short, they will appear incomplete, whereas overly long curtains will get dirty or be dragged on the ground. The perfect length is determined by the style you want and the functionality of the room. There are those who want curtains to end a little bit above the ground while others want them to touch the ground.
- Ignoring Ceiling Features and Obstacles
Prior to fitting curtain rods and tracks, ensure there are no air-conditioning vents, piping, electrical fixtures, recessed lights, or any other fixtures. That could get in the way around the ceiling or window area. This is because ignoring these aspects would affect the ease with which the curtains can be operated and mounted. You also need to take into consideration the location of nearby furniture and doors.
- Using Weak Brackets
Heavy curtains and blackout curtains can add weight to the curtain rods and even the brackets themselves. It is advisable to use the correct screw, wall plug, and fixture in order to avoid cases where the curtain rail droops and falls off. It is important to ensure that the fixtures used suit the wall, the bracket being used, and the weight of the curtain. If the curtain is very heavy, the brackets should be reinforced.
- Guessing Measurement Instead of Checking Them
Making assumptions about uniform sizes for all windows is dangerous and can result in curtains that do not fit right. Sometimes even windows in the same building have varying sizes. Take individual measurements for all windows. Write down the drop, the track width, and the place where you would like the curtain to finish. If the floor is uneven, take the measurement of the drop in different places before settling on the length.
- Skipping the Final Finishing
The new curtains will usually have some lines on them due to folding or transport during shipping. The installation should be done in such a way that the lines will not affect the hanging of the curtains in a neat manner. After the installation is done, use the care instructions provided by the manufacturer to remove the lines. There is an appropriate steaming or ironing process that will help create good folds in the fabric.
Final Thoughts
In Dubai, choosing the right curtain supplier in Dubai before hanging curtains is important. They are thinking about sun, glare, and heat when you pick fabric and lining. This way you can turn cheap curtains in Dubai into comfortable ones. Looking for a curtain shop near me? Curtain Fixing is a professional curtain shop in Dubai that can take the guesswork out. A quick visit can save you from a costly mistake. Additionally, you can check curtains online in Dubai.
